SRAM Red 22 11-speed hydraulic, mechanical group

SRAM will go 11-speed with new SRAM Red 22 and Force 22 road groupsets, with hydraulic rim and hydraulic disc brakes as options for the top-end group. For those wanting to add hydraulic brakes to an existing 10-speed system, SRAM announced new S-700 hydraulic levers that can be paired to S-700 hydraulic rim or disc calipers and any 10-speed SRAM group.

Prices and weights of all components are listed at the bottom of this article. SRAM can already claim to be the lightest and cheapest (in most countries) top-end 11-speed group.

SRAM claim all the new 11-speed groups to be 'trim-free', meaning you can use the full width of the cassette on either chain ring without adjusting the front derailleur or getting chain rub on the derailleur cage. In all cassette options from 11-25 to 11-28, what’s new is the 16-tooth cog, which makes for single-tooth differences from the 11 up to the 17. An 11-32 WiFli option will also be available.

BikeRadar tested all the new Red 22 groups over a few days and a few thousand vertical feet in California. Be sure to read our first ride review of the Red 22 hydraulic group with rim brakes after reading the details on each group below. Reviews of the Red 22 mechanical group and the Red 22 hydraulic group with disc brakes will come tomorrow.

Related reading

SRAM Red 22: first top end group to include hydraulic braking

With Red 22, SRAM has planted its flag as the first major component company with an integrated hydraulic brake road group. While Shimano and Campagnolo have continued to expand their electronic shifting offerings, SRAM has stayed the course with mechanical shifting across the board.

SRAM red 22 hydro r rim caliper : - Courtesy

The Red 22 Hydro R hydraulic rim caliper works with standard pads, wheels and frames

With Red 22 mechanical, SRAM has also notched the claim to the lightest and (in most markets) least expensive top-end 11-speed group of the Big Three. A complete Red 22 mechanical group weighs a claimed 1,747g, compared to 1,885g for Campagnolo’s Super Record and 2,016g for Shimano’s Dura-Ace 9000.

Red 22 shares a Yaw front derailleur, rear derailleur, crank options — including an integrated Quarq power meter — cassette options and chain across the mechanical and hydraulic configurations.

The Red 22 mechanical shifters are quite similar to current Red 2012 in ergonomics and function, with the exception of course being the 11^th indent. The rest of the mechanical group follows suit: it's Red 2012 technology tuned for 11-speed.

The Red 22 hydraulic shifter is largely identical to the mechanical shifter with the exception of the extended upper hood body that houses the hydraulic cylinder.

The sram red 22 hydro r hydraulic shift/brake lever: - Courtesy

The Red 22 Hydro R brake/shifter houses a hydraulic cylinder atop the lever

Designed to work with any wheel and any caliper-brake road frame, the Red 22 Hydro R caliper harnesses the power and modulation of a hydraulic system in a relatively svelte package. At a quick glance, the Hydro R calipers might not leap out visually for someone not looking for them. The Red 22 Hydro R disc brakes, however, are a substantial departure for road bicycles, requiring purpose-built frames and disc wheels. Both are fully sealed systems, which SRAM claims will prevent contamination and deterioration over time.

The Hydro R disc calipers us 19mm front and 18mm rear pistons, with 160mm rotors that SRAM says are required for road use, or 140mm rotors for cyclocross.

The Hydro R rim calipers have a quick release and a barrel adjuster, lending familiarity in feel and function with mechanical calipers. The disc calipers, however, have no tool-free adjustment option.

Both are open systems, which means the brake fluid can expand from heat without affecting brake performance.

SRAM red hydro r hydraulic disc caliper: - Courtesy

The Red Hydro R disc caliper features 19mm front and 18mm rear pistons

For their proclaimed benefits, the hydraulic systems also add weight, about 104g for the Hydro R rim system and 463g for the Hydro R disc, when you take into account the rotors and the additional weight of the wheel for the latter. Arguably, the frames could also increase in weight to account for the additional stability required at the fork leg and rear triangle.

SRAM Force 22 does not have any hydraulic options. The mechanical 11-speed group receives all the functionality of the Red 22 mechanical group, with slightly heavier materials and a lower cost.

The Red 22 and Force 22 components are not compatible with SRAM’s 10-speed groups.

SRAM red 22 has three brake options: one mechnical plus hydraulic rim and hydraulic disc: - Courtesy

SRAM Red 22 has many options for brakes, derailleurs, cranks and cassettes

10-speed hydraulic options

For those wanting to add hydraulic braking to an existing 10-speed group, however, SRAM will have the S-700 hydraulic levers, road calipers and disc calipers. This is not a complete group.

While SRAM says it will work with any SRAM 10-speed group, it will work best with a 2012 Red group that has a Yaw front derailleur because of the two-position left shifter. (Many front derailleurs have trim options to adjust the front derailleur in addition to shifting between the small and large chain rings.)